Bauhn MD 83615 Instruction Manual download pdf (Page 17)

After Sales Support

Telephone: 1300 884 987

General operating functions

Audio functions

NOTE!

The description applies to audio output on the connected speakers. Where devices with separate speakers are connected,

you can of course adjust the sound on those devices.

Volume

 Press the XQN- button on the remote control or turn the volume adjuster on the device clockwise to increase the volume.

 Press the XQN⁄ " button on the remote control or turn the volume adjuster on the device anti-clockwise to decrease the volume.

Switch sound off – MUTE

 Press the button on the remote control to turn the sound off completely. MUTING will appear on the display.

 Press the button on the remote control to turn the sound back on again. MUTING disappears from the display.

Bass/Treble

 Press the DCUU1VTGDNG button once or multiple times until the desired BASS or TREBLE function appears on the display.

 Use XQN"/1- to set the desired bass and treble.

X-bass

X-bass allows you to activate or deactivate a bass boost using the remote control.

 Press the Z/DCUU button on the remote control. The display will show X-BASS. The function is activated.

 Press the button again to deactivate X-bass again. The message on the display will disappear.

Setting clock time

Proceed as follows to set the clock:

 Press the ENQEM1VKOGT button on the remote control while the device is switched on.

 Confirm within 10 seconds using the GPVGT button.

 To set the day, press  or  and confirm your selection with GPVGT. Days are displayed in the English format: MON =

Monday, TUE = Tuesday, WED = Wednesday, THU = Thursday, FRI = Friday, SAT = Saturday, SUN = Sunday.

 Now use the  or  keys to choose either a 12- or 24-hour format and confirm with GPVGT.

 Use the  or  keys to select the desired hour and confirm with GPVGT.

 Press  or  to set the desired minutes. Confirm with GPVGT.

 Finally, press the ENQEM1VKOGT button again to save the settings.

Using the timer

The timer allows you to have the device start up in a particular mode at a particular time. The device offers two types of timer:

• The one-off timer is shown in the display with

and starts the device once only at the set time for a specific duration.

• The daily timer is shown in the display with FCKN[ and starts the device at the same time for a specified duration every day.

You can set both timers separately. There must be an interval of at least 1 minute between the chosen times.

To use the timer function, the time must be set as described above.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

No comments

Bauhn MD 83615 Instruction Manual Page 17